|
|
 |
1/2 |
|
|
| Material |
Feature |
Application |
Chemical durability |
Diamond
grain compounded
Nylon (grid)
0.25mm - 0.8mm
Diamond grain
& abrasive
compounded Nylon
0.1mm - 1.2mm
Abrasive: Almina • Silicon |
Excellent grinding performance
and durability.
Available for ultra hard metal.
High quality and low price. |
Burring, grinding, polishing finishing
for Improvement for surface roughness.
Production and maintenance in
Air craft, Auto parts, electornic parts, electric appliances, etc
most of all industry machines. |
The same as nylon. |
Nylon
6NY
66NY 0.05 - 2.5mm
610NY
612NY
|
The best durability against abrasion,
among chemical fabric with elasticity, strongness.
For oil, gasolin, detergents etc as well. |
Polishing for Wood surface etc Cleaning
for belt conveyer etc Washing for production line in paper, spinning,
printing gomme industries etc and bottle, dryer, dyeing mashines etc. |
Not enough for strong acid class
Dissolved by phenol,formic acid.
Strong against Alkali, almost no wear off.
High microbe resistance. |
Polypropylene
0.15mm - 2.0mm
|
The Lightest amoung chemical fablic.
High acid resistance and
alkali resistance.
Good Brush elasticity and
Brush bending restoration.
Not enough durability
(Brush filament may get split from the top.)
and Not absorb water.
Specific grabity 0.91. |
Polisher brush, vehicle brush, belt cleaner,
painting, floor brush, robe brush, straight brush, grinding brush. |
Strong for acid and alkaline liquid.
(Almost non-deteriorate.) |
Pylene
wool
6mm
|
Rope type brush filament. |
Washing for Air craft. |
|
Vinyl
Chloride
0.3mm - 1.0mm |
High Acid resistance and
Alkali resistance.
Not good performance in High temp. |
Washing for Glass bottle.
Mud matt. |
Strong against Hydrochloric, Sulfuric
soda and ammonia.Almost no wear off. |
Chloster
0.8mm - 1.0mm |
High performance on the durability and
almost no wear off. |
Washing for tunnel wall. |
Strong against Hydrochloric
Sulfuric soda.Almost no wear off. |
Conex
0.2mm - 0.5mm |
Available high temp use 240 - 260°C. |
Cleaning, polishing Work under hight
temp. |
Excellent performance against various
solvent, chemical solution, for organic solvent no change. |
Thunderlone
0.06mm
|
Polyaclylic faber added conductivity
and static electicity resistance. |
For all works need non static electicity
influence. |
Electiric resistance 5.85 x 102
ohms/cm. |
Monoeight
0.15mm - 0.3mm
|
Nylon added conductivity and static
electicity resistance. |
Production line in Paper, printing, resin,
film. |
Melting point 257°C.
Usage limit 110°C. |
Elebei
0.15mm - 0.5mm
|
Nylon added conductivity and static
electicity resistance. |
Deelectrified for office appliance, conveyer
device. |
Electiric resistance 3 x 103
- 7 x 103 ohms/cm. |
Polyester
0.3mm - 1.0mm
|
Among synthetic fabric, the hardest
elasiticity.
Melting point 260°C. |
The same as nylon. |
Resistance against acid.
Melting point 260°C.
Usage limi 140°C |
Butilene
0.35mm
|
Hard elasticity.
Specific gravity 1.32.
Melting point 220°C. |
|
Strong hydrochloric acid.
Sulfuric acid.
Nitric acid.
10% of alkli solution. |
| Material |
Feature |
Application |
Chemical durability |
|
|
